The post Landlords appeared first on Bio Clean of Utah.

The post Sewage Back Up – What do I do? appeared first on Bio Clean of Utah.

The post Air Sampling And Scrubber appeared first on Bio Clean of Utah.

There are some key components of mold removal that all experts agree on: 1) Mold must be physically removed; there is no product that can be sprayed on or fogged on or applied that will ‘kill’ the mold and neutralize it’s effects while saving the material itself. This refers to everything except the structure, i.e. the framing and subfloor. All other materials, like sheetrock, trim, baseboards, flooring, etc that are contaminated with mold should be removed. 2) During the removal or disturbance of mold, proper engineering controls should be in place. This may sound easy, but it is far more than just putting plastic over the door in the room you are working in. Mold spores are microscopic, and mother nature designed them well! They are adept at staying airborne and can easily spread if proper controls are not put in place. In addition to containment barriers, using a HEPA-rated air filter to create negative air pressure inside the containment will help keep mold spores contained to the affected area. 3) Anyone working around mold, regardless of the type of mold present, should wear proper PPE (personal protective equipment). This includes HEPA-rated respirators, TYVEK suits, heavy duty gloves and the like. 4) Finally, the area should be thoroughly cleaned before taking down the containment barriers. I use what I refer to as a ‘white-glove’ test. Essentially, you want all horizontal surfaces where mold spores could settle to be completely dust free.

The four points I make above are all included in standards or guidelines provided by the EPA, OSHA, Air Canada, and several restoration industry groups. There is no magic dust to sprinkle on mold that they are aware of yet (we haven’t found it yet either, but stay tuned for more blog posts!) If you find a company that doesn’t agree with the 4 above points, be very wary! Within each of those points, you will find different methods to accomplish the same goals. Our company stresses testing, before and after the job, to document mold levels before and after our work. Again, because mold is microscopic, just because a job looks clean doesn’t mean that is the case. Whatever your needs are, be sure to work with mold professionals that are licensed and trained to do the necessary work. Taking the cheapest bid initially could end up costing you a lot more later, in addition to putting the health of all of those in your home at risk.

The post Mold is a complicated issue… But there is help out there! appeared first on Bio Clean of Utah.

We do not in fact should invest a lot to ensure that we are protected at home. There are mold remediation that are just a stone away. And yes, some of them are picked up in your kitchen and bathrooms.

Among the most famous mold killer is bleach. Bleach as we know can abolish not only molds but even the spores that they create that sooner or later develop into a fresh fungi or bacteria. While bleach works out in some non porous materials – and by this we indicate items that don’t have small holes in them– such as tiles, bath tubs, glass and countertops et cetera; it is on the other hand inefficient in some porous things like wood and drywall as it is unable to pass through the surface.

Vinegar, an ingredient that is often used when cooking, is amazingly among the products applied in eradicating fungus. Unlike bleach, vinegar is mild and non-toxic, but it is just as effective as it can terminate as much as 82 % of assorted type of molds. What’s more? It does not give off hazardous odor. To get free of molds with the help of vinegar, just spray the pure white distilled vinegar to the moldy area and leave it for an hour in order to come down to the surface. After the allotted time, buff the area with water and then let it dry. It is recommended that this procedure be repeated several times with a few days interval to make sure the area will stay free from the colored fungus.

Of all the mold eradicating essentials, tea tree oil is acknowledged as being the most powerful as it is also the most expensive. Despite the fact that it presents no harm to people and pets, a minute amount of which can kill all type of molds. To figure out that the tea tree oil you buy will give the desired result, make sure that it is taken from the Melaleuca Alternifolia. One teaspoon per cup of water is needed for the solution. Spray it in the affected area and leave the solution in the surface without flushing it.

Baby powder is one more product in just your reach that can be applied to dry out mold, particularly on paper. Just sprinkle an adequate amount of baby powder on the pages of your hand-me-down – but-valuable books, documents and other paper components that may be a residence place of these undesirable pests.

The next time you have the need to abolish the bound and determined fungus, try discovering mold remediation found within the four corners of your home prior to running somewhere else for practical men use the accessible resources for their own benefit. Are you practical enough?

It is worthwhile to become practical and smart , so check out our website for more mold removal products and information!

The post Mold Remediation That Are Not Beyond Your Grasp appeared first on Bio Clean of Utah.

Molds are plant-like, microscopic organisms that do not only aid in the breakdown of dead materials in the environment but also recycle nutrients found in nature. Not all varieties of molds are unsafe. In reality, some species are essential in the development of penicillin, fermenting drinks and manufacturing cheese. But the ones that grow inside our homes are not the kind of house guests we desire to stay.

Mold removal is the extermination of molds and their origin in a certain affected area of a building. But before we proceed, let’s be clarified of some key points about molds and mold development prevention. To start with, these fungi thrive in places where there is moist and little or no sunlight. Second, solving the trouble should be done at the grassroots level. It means: get rid of the source of the mold, not just the mold itself. Third, ensure that areas inside the house are properly ventilated. Leave doors and windows open whenever possible. Finally, invest in good-quality ventilating fans and dehumidifiers if you don’t have an adequate air flow system or the one that you presently have seems to be insufficient.

Now, let’s disembark to business with how to remove molds:

Step 1. Seal off the room affected with plastic and tape prior to starting the mold removal. Ensure that there is a window nearby for easy exit of utilized mold cleaning products and your clothing. Walking through the house to discard them is such a bad idea.

Step 2. Take maximum caution as to not spread the condition to other areas. Mold ovums easily find their way to clothing and materials.

Step 3. Moisten down the affected zone to limit the spreading of spores. Clean the area with soap and water. Then, sterilize with the use of bleach. Rinse the area and dry immediately.

Step 4. Upon completing the task, do remove all clothing & cleanup materials through a close-by exit or window. Take each precaution needed. Do not spread the mold spores!

Step 5. For exposed wooden surfaces in the room, sand them down to remove any mold that might have stuck in its surface. Vacuum the area thoroughly and open the windows to get some fresh air into the room.

Step 6. Keep an air cleanser available upon finishing the task. Air quality should be a key concern. Eliminating mold growth caused by water damage is important not only to the materials involved but more so for one’s health. Take the time to seal each area of your house particularly the basement as well as the shower and bath areas.

The home is where almost all people feel most secured. It is almost everybody’s relaxation zone and it is revered that there’s no place in the world that could beat someone’s own home, so safeguard from the threats of molds. Black mold remediation is your best choice towards maintaining a healthy home.

The post Molds No More: A Simple Tip For Black Mold Remediation appeared first on Bio Clean of Utah.

The post Home inspections… You get what you pay for. appeared first on Bio Clean of Utah.

Around in our own home– regardless of how impeccably hygienic it may seem– at least a type of fungi is identified. Here are some self-help steps toward stopping the persistent life jeopardizing fungus in two critical areas at home– the bathroom and the basement:

Bathrooms are more often than not wet. The aforementioned fact combined with inadequate air circulation is the major reason why this part of the house is a home for molds. To properly address this matter, the source of this type of fungi must be found and fixed– a leaky faucet, roof, or pipe– not just the mold per se. When you’re sure there’s a drip, but for some reason it is hard to pin-point where the root cause is, it is encouraged to seek the help of the people in authority– a plumber for example to exterminate the stubborn fungus.

Dampness is not the only problem, ventilation as well. Thus, mounting an exhaust fan is an excellent help to improve the air circulation. Contrary to the usual practice, we must keep the bathroom door open when vacant. That way, fresh air can get in. If the ventilation system is too old or not enough to enhance the airflow, it is more practical to change it with a new one.

Bathrooms and basements have a common denominator; both have the liability to deal with inadequate ventilation and inappropriate air circulation. A very damp and extremely hot atmosphere to include in lack of airflow is justification enough for mold to flourish in this type of environment. Just like what was said earlier, the cause of Stachybotrys chartarum and other kinds of fungus must be confronted, not simply just the mold itself. Since poor ventilation is the main issue, if possible as it is deem crucial, a fan must be installed or an opening window to increase airflow. The dose of moisture must also be regulated. To keep the moisture level down, a dehumidifier comes in handy, especially in spring and summer seasons in the darkest side of the house. In cases wherein you want to enhance air quality, setting up of air purifier in addition to dehumidifier will generate the best outcome. The air purifier eliminates all the unclean stuff like allergens, molds, dust and other awful things from the air.

Some people are willing to cash away a lot of their hard-earned money just to get rid of the stubborn molds so they hire experts to carry out the job. While there are those who are on a tight funds and manage to do it on their own. Remember, like anything in life, we commonly have a selection. So why shell out loads of bucks for mold inspection if we can sweat our way out and save some money for the rainy days?

The post Do-It-Yourself Solution In Black Mold Removal appeared first on Bio Clean of Utah.

The post Renters insurance is a must! appeared first on Bio Clean of Utah.

The post Get your roof inspected regularly appeared first on Bio Clean of Utah.