Indoor Plumbing Can Lead To Leaks and Mold We love our indoor plumbing. We wouldn’t want to do without it. But every bit of Plumbing in our homes potentially could spring a leak at some point in time. If a part fails, if a part wears out, if it was installed improperly it could lead…
Mold From Roof Leak in Salt Lake City Utah If you don’t take care of leaks and materials stay wet long enough you will have mold. In this instance it was a small condo, and they had a roof leak that went on for a few months actually and sure enough they had mold. When…
Mold Removal in Commercial Building We are here doing mold removal in this commercial building and this is what we found in an adjacent closet to the area where we’re doing the mold removal. There are two large ducts that go under the floor, they are below grade, and they are filled with water. These two…
Mold Cleanup Job in Salt Lake City Utah We’re here doing some mold removal. Nicely redone kitchen from a few years ago. There was a leak in the water supply line behind the fridge. It went on for a long time and because of that it wasn’t covered by insurance. The homeowners started off with…
Mold in Salt Lake City Home With Asbestos While doing a mold inspection in this Salt Lake City home some of the visible mold we discovered is on a material that appears to be asbestos.
Mold Cleanup in Syracuse Utah We are finishing a small amount of mold cleanup in this Syracuse Utah home. It was a small amount of mold but what was surprising on this job is when we did air sample testing the level of mold spores in the air was surprisingly high. No surprises so when…
Mold Problem In Showers This is a beautiful shower, but it has a problem. It was not designed with air exchange in mind. The shower door goes all the way to the ceiling. Unless you leave the door open the is very little air exchange to allow the water to evaporate and surfaces to dry.…
Mold Removal Job In Park City Utah We are setting up to start a new mold job in Park City Utah. This is our containment on the doorway to isolate the work area from the rest of the home. The goal of the containment is to keep the dirty stuff in, keep the mold spores…